OpenCAL in the Media
====================

Computed Axial Lithography and OpenCAL have been featured across articles and YouTube channels.
A selection is collected below.

Articles
--------

* **Computed Axial Lithography: 3D Printing in Seconds** — *Make:*
  `Read the article <https://makezine.com/article/digital-fabrication/computed-axial-lithography-3d-printing-in-seconds/>`__

* **Berkeley researchers send 3D printer into space** — *Berkeley Engineering*
  `Read the article <https://engineering.berkeley.edu/news/2024/07/berkeley-researchers-send-3d-printer-into-space/>`__

* **Computed Axial Lithography for In-Space Manufacturing** — *NASA TechPort* (project record)
  `View the project <https://techport.nasa.gov/projects/106639>`__

Videos
------

**The FUTURE of 3D Printing? Computed Axial Lithography!** — *3D Printing Nerd*

.. raw:: html

    <div style="max-width: 700px; margin: 0.5em auto 1.5em;">
        <iframe width="100%" style="aspect-ratio: 16 / 9; border: 0;"
            src="https://www.youtube.com/embed/oHPrnYMdLow"
            title="The FUTURE of 3D Printing? Computed Axial Lithography!"
            allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture"
            allowfullscreen></iframe>
    </div>

**Computed Axial Lithography: Rapid, Layerless Printing in Space** — *Berkeley Sensor & Actuator Center*

.. raw:: html

    <div style="max-width: 700px; margin: 0.5em auto 1.5em;">
        <iframe width="100%" style="aspect-ratio: 16 / 9; border: 0;"
            src="https://www.youtube.com/embed/Z1BiJtZQcfE"
            title="Computed Axial Lithography: Rapid, Layerless Printing in Space"
            allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture"
            allowfullscreen></iframe>
    </div>

**Volumetric 3D Printing Is REALLY FAST** — *The Action Lab*

.. raw:: html

    <div style="max-width: 700px; margin: 0.5em auto 1.5em;">
        <iframe width="100%" style="aspect-ratio: 16 / 9; border: 0;"
            src="https://www.youtube.com/embed/L7QnADt04ZU"
            title="Volumetric 3D Printing Is REALLY FAST"
            allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture"
            allowfullscreen></iframe>
    </div>

Playlist
--------

**3D Printing in Outer Space** — *3D Printing Nerd* (multi-part series)

.. raw:: html

    <div style="max-width: 700px; margin: 0.5em auto 1.5em;">
        <iframe width="100%" style="aspect-ratio: 16 / 9; border: 0;"
            src="https://www.youtube.com/embed/4bMUm5sanLA?list=PLKLBL4JgbOp5S22UifMT0ZPalpXh9Tk_z"
            title="3D Printing in Outer Space playlist"
            allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture"
            allowfullscreen></iframe>
    </div>

Social
------

* **OpenCAL on Instagram** —
  `Watch the reel <https://www.instagram.com/reels/C_Lq8ggybmI/>`__